Figure 8-2 Dc/Dc Converter Connector; Figure 8-3 Removing/Replacing The Dc/Dc Converter - Sun Microsystems SPARCstation Voyager Service Manual

DC/DC Converter Connector
FIGURE 8-2
2. Loosen the four threaded standoffs.
Use a 3/16" hex nut driver. See
3. Remove the DC/DC converter.
Removing/Replacing the DC/DC Converter
FIGURE 8-3
DC/DC converter
connector
CPU board
.
FIGURE 8-3
DC/DC converter
Threaded standoffs
(4 places)
Chapter 8 Major Subassemblies 71