Replacing The Left Cap; Figure 7-26 Replacing The Right Cap; Figure 7-27 Replacing The Lock Block - Sun Microsystems SPARCstation Voyager Service Manual

Replacing the Right Cap
FIGURE 7-26
Note – If the system has a lock block installed, insert the lock bock into the lower
right cap hole and tighten the screw.
Replacing the Lock Block
FIGURE 7-27

Replacing the Left Cap

1. Hold the front and rear covers together and slide the left cap onto the unit.
See .
FIGURE 7-28
Screw
Rubber plug
Right cap
Screw
Rubber plug
Lock block
Chapter 7 Internal Access 63