Removing The Display Panel; Figure 7-9 Removing The Filler Cover - Sun Microsystems SPARCstation Voyager Service Manual

2. Remove the filler cover by lifting it up.
Screws
Removing the Filler Cover
FIGURE 7-9
3. Proceed to Section "Removing the Front Cover" on page 7-50.

Removing the Display Panel

1. Loosen the two Phillips screws behind the display panel.
See .
FIGURE 7-10
2. Remove the display panel from the system by wiggling it upward.
Caution – Place the display panel with its front facing down on a flat and clean
surface. The front surface could be damaged otherwise.
Filler cover
Chapter 7 Internal Access 49