Figure 10-7 Removing/Replacing The Speaker; Figure 10-8 Flex Connectors Location On The Video Board - Sun Microsystems SPARCstation Voyager Service Manual

FIGURE 10-7
3. Disconnect the flex cable from the video board.
See
FIGURE 10-8
FIGURE 10-8
4. Remove the three screws from the video board.
See
FIGURE 10-9
5. Pull the video board down slightly and slide it out of the three pins.
102 SPARCstation Voyager Service Manual • December 1994
Removing/Replacing the Speaker
.
Video board
Flex Connectors Location on the Video Board
. Use a Phillips screwdriver.
Video board
Speaker tab
Speaker
Flex cable
Flex connectors