Figure 8-7 Removing The Video Board; Figure 8-8 Removing The Floppy Cable From The Floppy Drive - Sun Microsystems SPARCstation Voyager Service Manual

Screw
Pins
Removing the Video Board
FIGURE 8-7
3. Disconnect the floppy cable from the floppy drive.
Use the tip of a flat blade screwdriver or similar tool to push both ends of the
connector locking device away from the drive. Gently, pull the floppy cable from the
drive.
Removing the Floppy Cable From the Floppy Drive
FIGURE 8-8
4. Remove the floppy cable from the system.
Screws
Connector
Floppy drive
Connector
locking device
Floppy cable
Chapter 8 Major Subassemblies
Video board
75