User Manual of Network Video Recorder
After running the client software, a wizard will pop up to guide you to add the device and operate some basic
settings. For detailed configuration about the wizard, please refer to the Quick Start Guide of iVMS-4200.
The following figure shows the main interface after accessing to the software:
17.1.2 Adding the NVR to the Client Software
Perform the following steps to enter the Device Adding interface:
1.
Click the
or click Tools->Device Management to open the Device Management page.
2.
Click the Server tab.
3.
Click Encoding Device to enter Encoding Device Adding interface.
Figure 17. 2 User Login
Figure 17. 3 Control Panel
icon on the control panel,
206