Adding And Connecting The Ip Cameras; Setting The Admin Password For Ip Camera - HIKVISION DS-96128NI-F16 Series User Manual

User Manual of Network Video Recorder

2.4 Adding and Connecting the IP Cameras

2.4.1 Setting the Admin Password for IP Camera

Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Steps:
1. Select the Add IP Camera option from the right-click menu in live view mode or click Menu> Camera>
Camera to enter the IP camera management interface.
For the IP camera detected online in the same network segment, the Security status shows whether it is
active or inactive.
Figure 2. 12 IP Camera Management Interface
2. Click the inactive icon of the camera to enter the following interface to activate it. You can also select
multiple cameras from the list and click the One-touch Activate to activate the cameras in batch.
3. Set the password of the camera to activate it.
Use Admin Password: when you check the checkbox, the camera (s) will be configured with the same
Figure 2. 13 Activate the Camera
28