Table of Contents
Advertisement
User Manual of Network Video Recorder
Address: Input the device's IP address or domain name.
Port: Input the device port No.. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case letters,
lower case letters, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
7.
Optionally, you can check the checkbox Export to Group to create a group by the device
name. All the channels of the device will be imported to the corresponding group by default.
iVMS-4200 also provides a method to add the offline devices. Check the checkbox Add Offline Device, input
the required information and the device channel number and alarm input number, and then click Add. When
the offline device comes online, the software will connect it automatically.
8.
Click Add to add the device.
Figure 17. 6 List of Successfully Added Device
17.1.3 Configuring the Video Wall
Steps:
1.
Click the
icon on the control panel to enter the video wall configuration and operation interface.
208
Advertisement
Table of Contents
