User Manual of Network Video Recorder
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Click the PTZ Parameter Settings button to set the RS-485 parameters.
3. Enter the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
4. Click Apply button to save the settings.
Figure 4. 1
PTZ Settings
Figure 4. 2
PTZ- General
45