HIKVISION DS-96128NI-F16 Series User Manual page 7

User Manual of Network Video Recorder
Product Key Features
General
 Connectable to network cameras, network dome and encoders.
 Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or
PSIA protocol.
 Connectable to the smart IP cameras.
 PAL/NTSC adaptive video inputs.
 Each channel supports dual-stream.
 Up to 128/256 network cameras can be connected.
 Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc..
 The quality of the input and output record is configurable.
 A redundant power supply is provided to improve the system stability.
Local Monitoring
 Simultaneous HDMI1/VGA output as the main output and the HDMI2 works as the auxiliary output.
 All video outputs at up to 1920× 1080 resolution.
 Live view screen can be switched in group, and manual switch and auto-switch live view are also provided,
and the interval of automatic cycle can be adjusted.
 Quick setting menu is provided for live view.
 Motion detection, video tampering, video exception alert and video loss alert functions.
 Privacy mask.
 Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
 Zooming in by clicking the mouse and 3D positioning by dragging mouse.
HDD Management
 Up to 24/18 SATA hard disks can be connected. (Each disk with a maximum of 4TB storage capacity.)
 8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
 The SAS expansion enclosure can be connected for the expanded storage via the miniSAS interface.
 Support S.M.A.R.T. and bad sector detection. (Not supported when the RAID function is enabled.)
 HDD group management.
 Support HDD standby function.
 HDD property: redundancy, read-only, read/write (R/W).
 HDD quota management; different capacity can be assigned to different channel.
 Support RAID0, RAID1, RAID5 and RAID10 storage scheme, and can be enabled and disabled on your
demand.
Recording and Playback
 Holiday recording schedule configuration.
 Continuous and event video recording parameters.
 Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm.
 8 recording time periods with separated recording types.
 Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule and
manual recording.
 Locking and unlocking record files.
 Local redundant recording.
 Playing back record files by events (alarm input/motion detection/VCA).
 Playing back record files by smart search (intrusion/motion detection).
6