Setting Working Device; Managing Hot Spare System - HIKVISION DS-96128NI-F16 Series User Manual

User Manual of Network Video Recorder

7.3.1 Setting Working Device

Steps:
1. Enter the Hot Spare settings interface.
Menu > Configuration > Hot Spare
2. Set the Work Mode as Normal Mode (default).
3. Check the checkbox of Enable to enable the hot spare function.
4. Enter the IP address and admin password of hot spare device.
Figure 7. 15 Setting Working Mode for Working device
5. Click the Apply button to save the settings.

7.3.2 Managing Hot Spare System

Steps:
1. Enter the Hot Spare Settings interface of the hot spare device.
The connected working device is displayed on the device list. Check the checkbox to select the working
device from the list, and click the Add button to link the working device to the hot spare device.
A hot spare device can connect up to 32 working devices.
99