HIKVISION DS-96128NI-F16 Series User Manual page 60

User Manual of Network Video Recorder
4) Click Edit button or click on the color icon under the edit button and draw the schedule line on the panel.
Edit the schedule:
I.
In the message box, you can choose the day to which you want to set schedule.
You can click the
II. To schedule an all-day recording, check the checkbox after the All Day item.
III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Up to 8 periods can be configured for each day. And the time periods can't be overlapped each other.
IV. Select the record type in the dropdown list.

To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video Content
Analysis) triggered recording, you must configure the motion detection settings, alarm input settings or VCA
settings as well. For detailed information, refer to Chapter 8.1, Chapter 8.2 and Chapter 8.5.

The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording or capture for other days in the week. If the
schedule can also be applied to other days, click Copy.
Figure 5. 7 Recording Schedule Interface
button to set the accurate time of the schedule.
Figure 5. 8 Edit Schedule
59