Table of Contents
Advertisement
User Manual of Network Video Recorder
13.4 Configuring Quota Mode
Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Quota, as shown in Figure 13. 16.
The NVR must be rebooted to enable the changes to take effect.
3. Select a camera for which you want to configure quota.
4. Enter the storage capacity in the text field of Max. Record Capacity (GB), as shown in Figure 13. 17.
5. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button to
enter the Copy Camera menu, as shown in Figure 13. 18.
Figure 13. 16 Storage Mode Settings Interface
Figure 13. 17 Configure Record/Picture Quota
173
Advertisement
Table of Contents
