HIKVISION DS-96128NI-F16 Series User Manual page 86

User Manual of Network Video Recorder
Figure 6. 11 Setting Intrusion Detection on IP Camera
2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage
methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps:
1. Enter Playback interface.
Menu>Playback
2. Select the Smart in the drop-down list on the top-left side.
3. Select a camera in the camera list.
4. Select a date in the calendar and click the
Table 6. 2 Detailed Explanation of Smart Playback Toolbar
Button Operation
Draw line for the
line crossing
detection
Set full screen for
motion detection
File management for
video clips
Smart settings
5. Set the rules and areas for smart search of VCA event or motion event.

Line Crossing Detection
button on the left toolbar to play the video file.
Figure 6. 12 Smart Playback Interface
Button
Draw quadrilateral
for the intrusion
detection
Search matched
85
Operation Button
Clear all
/
Stop playing
/
video files
Operation
Draw rectangle
for the intrusion
detection
Start/Stop
clipping
Pause playing /
Play
Filter video files
by setting the
target characters