Configuring Motion Detection Recording - HIKVISION DS-96128NI-F16 Series User Manual

User Manual of Network Video Recorder

5.3 Configuring Motion Detection Recording

Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes
place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger
certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center
and so on. In this chapter, you can follow the steps to schedule a record which triggered by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the
area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
The full-screen motion detection is configured by default.
4) Click Settings, and the message box for channel information pop up.
Figure 5. 11 Motion Detection
Figure 5. 12 Motion Detection- Mask
61