HIKVISION DS-96128NI-F16 Series User Manual page 32

User Manual of Network Video Recorder
Make sure the camera to add has already been actiavted.
4. (For the encoders with multiple channels only) check the
shown in the following figure, and click OK to add multiple channels.

OPTION 3:
Steps:
1) On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera
(Custom) interface.
Figure 2. 18 Custom Adding IP Camera Interface
2) You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the camera
management interface.
3) (Optional) Check the checkbox of Continue to Add to add other IP cameras.
4) Click Add to add the camera.
Figure 2. 17 Selecting Multiple Channels
31
of Channel Port in the pop-up window, as
checkbox