Table of Contents
Advertisement
User Manual of Network Video Recorder
3.
Select the VCA detection type to Face Detection.
4.
Click
to enter the face detection settings interface. Configure the trigger channel, arming schedule and
linkage action for the face detection alarm. Please refer to step3~step5 of Chapter 9.1 Setting Motion
Detection Alarm for detailed instructions.
5.
Click the Rule Settings button to set the face detection rules. You can click-and-drag the slider to set the
detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
6.
Click Apply to activate the settings.
9.3 Line Crossing Detection
Purpose:
This function can be used for detecting people, vehicles and objects cross a set virtual line. The line crossing
direction can be set as bidirectional, from left to right or from right to left. And you can set the duration for the
alarm response actions, such as full screen monitoring, audible warning, etc.
Steps:
1.
Enter the VCA settings interface.
Menu> Camera> VCA
Figure 9. 2 Face Detection
Figure 9. 3 Set Face Detection Sensitivity
118
Advertisement
Table of Contents
