Playing Back By Event Search - HIKVISION DS-96128NI-F16 Series User Manual

User Manual of Network Video Recorder
Button Operation
Full Screen
Save the clips

6.1.3 Playing Back by Event Search

Purpose:
Play back record files on one or several channels searched out by event type (e.g., alarm input, motion detection
and VCA).
Steps:
1. Enter the Playback interface.
Menu>Playback
2. Select the Event in the drop-down list on the top-left side.
3. Select Alarm Input, Motion or VCA as the event type.
Here we take playback by VCA as the example.
4. Select the minor type of VCA from the drop-down list.
For configuring the VCA recording, please refer to Chapter 5.4 Configuring VCA Event Recording.
5. Select the camera (s) for searching, and set the Start time and End time.
6. Click Search button to get the search result information. You may refer to the right-side bar for the result.
7. Click button to play back the file.
Pre-play and post-play can be configured.
8. Playback interface.
The toolbar in the bottom part of Playback interface can be used to control playing process.
Button Operation
Process bar
Figure 6. 6 Motion Search Interface
81
Button
Exit
/
Operation
Next day
Scaling up/down the
time line