HIKVISION DS-96128NI-F16 Series User Manual page 210

User Manual of Network Video Recorder
Figure 17. 7 List of Successfully Added Device
2. Click Enter Video Wall Config to enter the decoding device and video wall configuration interface.
3. A default video wall view with the window division of 4*4 is provided. You can edit the default video wall or
add a new video wall as desired.
4. Click-and-drag the decoding output on the left-side list to the display window of video wall, to configure the
one-to-one correspondence. You can also click and hold the Ctrl or Shift key to select multiple outputs and then
drag them to the video wall for configuring linkage in batch. You can click
display window to release the linkage.

Up to 4 video walls can be added to the client software.

The total number of the display windows of the video wall should be no more than 100.

The ranges of the row number and column number are both between 1 and 10.
209
in the upper-right corner of the