Table of Contents
Advertisement
User Manual of Network Video Recorder
3.1 Introduction of Live View
Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live
View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times
(depending on which menu you're on) brings you to the Live View mode.
Live View Icons
In the live view mode, there are icons at the upper-right of the screen for each channel, showing the status of the
record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms
occur as soon as possible.
Icons
Alarm (video loss, video tampering, motion detection, sensor alarm, or VCA alarm)
Record (manual record, schedule record, motion detection, alarm or VCA triggered
record)
Alarm & Record
Event/Exception (motion detection, sensor alarm, VCA or exception information, appears
at the lower-left corner of the screen. Please refer to Chapter 8.6 Setting Alarm Response
Actions for details.)
Table 3. 1 Description of Live View Icons
Description
37
Advertisement
Table of Contents
