Table of Contents
Advertisement
Auto QC² | Main Menu | 95
Importing Images
If the images can not be send over the network from the NX Workstation to the
Auto QC² Software, this functionality can be used to import them. Pre-
requisite is that the images were exported in DICOM-format at the NX
Workstation (NX2.0 or higher). For details refer to the Auto QC² Key User
Manual.
Workflow:
1. Click on Import Images in the Main Menu.
2. Browse for the folder the DICOMDIR file is located:
3. All exposures from the DICOMDIR are shown.
4. Select the images to import and click on OK. If you want to import all
images click on Select All.
2370C EN 20180330 1524
Advertisement
Table of Contents
