Updating Settings Of An Existing X-Ray Tube - AGFA Auto QC2 User Manual

90 | Auto QC² | Main Menu

Updating Settings of an Existing X-Ray Tube

In the Main Menu window of Auto QC² Software the user can update the
settings of an X-Ray Tube.
To adapt or update settings of an existing X-Ray Tube
1. Select an X-Ray Tube from the list in the X-Ray Tube pane.
2. Press the Update action button of the X-Ray Tube pane.
Figure 71: Main Menu window with Update action button highlighted.
The workspace of the Main Menu window is filled with the Update X-Ray
Tube settings and a Save and Close action button.
Figure 72: Update X-Ray Tube settings in Main Menu window.
2370C EN 20180330 1524