Table of Contents
Advertisement
Light Field Indicator Target
Round dots.
1.
Arrows.
2.
Figure 12: The Auto QC² Light Field Indicator target.
The Light Field Indicator target is used to perform the Light Field Indicator.
You can check the centering of the tube of your X-Ray equipment by
collimating on the center of the four markers and the arrows. In the exposure
result on the cassette, the collimated field should be visible and aligned with
the four markers. If this is not the case, the light field indication is not correct.
Table 9: Description of the Light Field Indicator target.
Element
Arrows.
Auto QC² | Auto QC² Hardware Components | 35
Function
Are used to position the Light
Field Indicator target in the
longitudinal and transverse
side.
2370C EN 20180330 1524
Advertisement
Table of Contents
