Table of Contents
Advertisement
In this window the following actions are possible. Refer to the appropriate
section for more information.
Topics:
•
Browsing through the Images of a Test
•
Roaming
•
Setting Comments
•
Zooming
•
Accepting or Rejecting Images
Browsing through the Images of a Test
In the View window, use the Browse buttons to go to the next or the previous
exposure of a test.
Figure 40: View window with browse buttons highlighted.
For example, for the Signal-to-Noise Ratio test (part of the Periodic Quality
Control Test Group), you will be able to browse between the two exposures
(PHQC and FFQC).
Roaming
When you are inspecting an exposure, you can roam on the image.
To roam over an exposure:
Auto QC² | General Workflow | 61
2370C EN 20180330 1524
Advertisement
Table of Contents
