AGFA Auto QC2 User Manual page 33

Part of the
phantom
Copper plate (2)
MTF Edge targets
(3)
Horizontal ruler
with holes and
squares (4)
Vertical ruler with
holes and squares
(5)
ID Data (6)
Jitter Slits (7)
Pixel Size Square (8)
Refer to the Workflow Sheets for more information.
To position the phantom:
1. Check if the positioning template is well positioned.
2. Put the cassette on the positioning template.
Auto QC² | Auto QC² Hardware Components | 33
Material
Copper
Tungsten
Ruler with
synthetic parts
CNC precision
holes in thin lead
layer
Squares
Ruler with
synthetic parts
CNC precision
holes in thin lead
layer
Squares
Function
wedge will be situated under the
cathode side.
Used for the Radiation Quality
test.
Used for the Spatial Resolution
test.
Used for spatial check.
Used for spatial check.
The pattern of holes uniquely
identifies the phantom.
Used for the tests Laser Beam
Jitter, Overshoots/Ringing and
Scan-Line Dropouts which are
part of the Periodic Quality
Control.
Used for determining the
horizontal and vertical pixel size
and the image skew.
2370C EN 20180330 1524