Using The History Function - AGFA Auto QC2 User Manual

78 | Auto QC² | Using the History Function

Using the History Function

The History window is used for managing history overview reports.
A user working in the History window is able to:
• Consult history results for Auto QC² tests performed for a specific
Digitizer, room, plate type and date interval.
• Generate a history report for the Auto QC² tests listed below:
• Export the history data.
The user can consult the history for the following tests:
• Pixel size.
• Pixel aspect ratio.
• Laser beam positioning error.
• Distance accuracy.
• Spatial resolution (MTF) Horizontal.
• Spatial resolution (MTF) Vertical.
• Image Skew.
• Laser Beam Jitter.
• System Linearity.
• Dynamic Range.
• Signal-to-Noise Ratio.
• System Sensitivity.
• Dark Noise.
• Erasure Efficiency.
• Radiation Quality.
• Horizontal Signal Uniformity.
• Vertical Signal Uniformity.
• Image Size.
To use the History window:
1. In the History Criterion Selection pane, define the Search criteria.
2. Click the History action button.
The system will start generating a history overview for all reports meeting
the history criteria.
At this moment, the Search fields and the History action button will be
disabled.
When no results are found Auto QC² Software will display the following
message. Click OK to go back to the History criteria panel.
2370C EN 20180330 1524