Performing The Visual Check - AGFA Auto QC2 User Manual

60 | Auto QC² | General Workflow

Performing the Visual Check

For a number of Auto QC² tests a visual check of the exposure is optional or
required.
Refer to the Workflow Sheets for more information.
To perform the visual check:
1. In the Worklist pane of the Worklist window, select an image.
2. Click the View action button or perform a double click to the appropriate
line in the Worklist.
1.
2.
3.
1
2
3
Figure 39: View window.
2370C EN 20180330 1524
The Text area: this area holds information on the test, the exposure
type, the cassette and the Digitizer. It also allows you to add
comments.
The Image area.
The Zoom area.
WARNING:
Test results are incomplete if only part of the image is
checked.
On low resolution monitors, the visual check window contains a
vertical scroll bar. Use the scroll bar to view the complete image.