AGFA Auto QC2 User Manual page 79

Figure 61: No history results found.
If there are positive results for the History criteria a test overview will
appear on the left side of the window and the Report overview pane itself
is filled with the graphical interface of results:
Figure 62: History window after Search action.
When the History window is opened:
• The system will perform an auto scaling algorithm for displaying the
graphs and results properly.
• The scan date with corresponding data will be displayed for each
history overview.
• A red triangle means that the test did not meet the acceptance levels.
• A yellow dot means that the result is within the acceptance levels.
• The dotted lines show the acceptance levels.
When test results are not in range with the acceptance levels the system
will indicate this in the graphical presentation.
3. Select a test from the graphical test overview.
Auto QC² | Using the History Function | 79
2370C EN 20180330 1524