Managing The Worklist - AGFA Auto QC2 User Manual

54 | Auto QC² | General Workflow

Managing the Worklist

When the Worklist window of Auto QC² Software is opened, Auto QC²
Software performs a number of preparatory actions:
• Auto QC² Software retrieves the Digitizers which have exposures waiting
to be processed for the selected Test Group. For each Digitizer, the system
will show the number of exposures waiting to be processed.
• Auto QC² Software retrieves all predefined exposures.
• Auto QC² Software sets the default Test Group to PQC.
Figure 26: Worklist window.
When the system has performed these actions, the user has to perform a
number of steps.
To manage the worklist of images:
1. Select a Digitizer.
2. Select a Test Group (the default Test Group is PQC).
3. Check if all conditions for performing the test are fulfilled
2370C EN 20180330 1524
Note:
When images are sent to the Auto QC² station after a selection of a
Test Group and Digitizer are made, there will be no automatic
upload of these images. You will need to refresh the worklist by
selecting a Test Group or a Digitizer again.