AGFA Auto QC2 User Manual page 62

62 | Auto QC² | General Workflow
1. Click once on the image in the Image area.
In the Image area, a square marker appears around the clicked point.
The Zoom area is filled with the part of the image having a square marker.
1
2
3
Figure 41: View window with square marker in the Image area.
2. Roam over the image by dragging the square marker around in the Image
area or by clicking a new area in the Image area.
Setting Comments
When you are inspecting an exposure in the View window, you can add
comments to the image in the Comments field of the Text area.
To set comments on an image:
1. Click the Comments field.
2370C EN 20180330 1524