Table of Contents
Advertisement
34 | Auto QC² | Auto QC² Hardware Components
3. Check the orientation of the phantom: the Heel effect side (indicated by
the label on the cover of the phantom) must be on top of the label on the
positioning template. The red dot of the phantom must be situated under
the anode.
4. Place the phantom carefully on top of the cassette. The positioning holes in
the phantom must fit with the white holders of the positioning template.
2370C EN 20180330 1524
CAUTION:
Handle the phantom extremely careful. If it drops, the
risk of damage exists.
Advertisement
Table of Contents
