General Workflow
This section describes the general workflow for planning and performing Auto
QC² tests.
This workflow consists of the following steps:
1. Identify the Test Group.
2. Prepare the modality and acquire an exposure.
3. Identify and scan the cassette and send the exposure to the Auto QC²
Software using NX.
4. Manage the worklist.
• Select Digitizer and Test Group.
• Check the status of the icons.
• Remove exposures.
• Edit image information.
• Perform the visual check.
• Generate the result, publish the report and export the result data.
Topics:
•
Test Group Selection
•
Preparing the Modality and Acquiring an Exposure
•
Identifying the Cassette and Sending the Examinations to the Auto QC²
Software Station using NX
•
Managing the Worklist
Auto QC² | General Workflow | 49
2370C EN 20180330 1524