Table of Contents
Advertisement
Figure 50: Pass or Fail icons.
Table 12: Test Results icons.
Icon
Figure 51: Approved
icon.
Figure 52: Not OK icon.
Figure 53: Calculation
Failed icon.
5. Publish the report as described in the following procedure. Only then the
calculations are saved.
6. Additionally click Export Data to export the data to a csv- or txt-file.
7. If you want to view the related image(s) for a test again, click the View
button or perform a double click in the appropriate line of the result table
to switch to the view environment.
8. If you choose not to publish the report, click Close.
As a consequence:
Meaning
The test has been processed correctly for this
image and the result is OK.
The test has been processed correctly, but the
result does not meet the requirements.
Performing the calculations has failed. If this
icon is displayed in a PQC/ATP procedure,
exposing must be redone for both exposures.
As long as there are failed calculations, you
will not be able to generate results.
Auto QC² | General Workflow | 69
2370C EN 20180330 1524
Advertisement
Table of Contents
