Table of Contents
Advertisement
18 | Auto QC² | Introduction
Installation
Installing Auto QC² Software is done by Agfa Service.
The availability of the Auto QC² software depends on the license dongle to be
connected to the PC. Agfa advizes not to remove the dongle, even if the
Auto QC² software is not being used, because this will consume the "license
grace period". The grace period is a limited period of time during which you
can continue working if the dongle is accidentaly removed or lost.
To remove the dongle without consuming this license grace period, open the
License Manager tool (Start > Agfa > Service > License Manager) and click
"Disable grace functionality". This may be useful if Auto QC² is installed on a
laptop, used for other purposes. To use Auto QC², the dongle must be plugged
in. If the dongle gets broken or lost, the licenses will be immediately blocked
and you must open the License Manager tool and click "Enable grace
functionality" to continue working for a limited period of time, during which
the dongle can be replaced.
2370C EN 20180330 1524
Advertisement
Table of Contents
