Performing A Quality Control - AGFA DR 100e User Manual

Performing a quality control

In NX:
1. Select the image on which quality control is to be performed.
2. Prepare the image for diagnosis by using e.g. L/R markers or annotations.
3. If the image is OK, send the image to a hardcopy printer and/or PACS
(Picture Archiving and Communication System).
Related Links
Connecting DR 100e to a wired network
DR 100e (Digital Radiography) | Basic Workflow | 79
Note: If you use a wired network, NX can only send images if
the network cable is plugged in.
Note: If you use a wired network, NX may display error
messages while working unplugged because it cannot send
images. To prevent error messages being displayed, halt the
send queue and restart it when plugging in the network cable.
Refer to the NX User Manual.
on page 97
0365B EN 20181015 0853