HIKVISION 7600NI-SE Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Network Hardware
  5. 7600NI-SE Series
  6. User manual
HIKVISION 7600NI-SE Series User Manual

HIKVISION 7600NI-SE Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Video Recorder
User Manual
UD.6L0202D1131A01

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION 7600NI-SE Series

Summary of Contents for HIKVISION 7600NI-SE Series

  • Page 1 Network Video Recorder User Manual UD.6L0202D1131A01...
  • Page 2 The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book.
  • Page 3 User Manual of DS-7600NI Series NVR Regulatory information FCC information This equipment has been tested and found to comply with the limits for a digital device, compliance: pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 User Manual of DS-7600NI Series NVR Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment. • Unit is designed for indoor use only. •...
  • Page 5 User Manual of DS-7600NI Series NVR Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to the models listed in the following table. Series Model Type 7600NI-SE DS-7604NI-SE...

  • Page 6: Product Key Features

    User Manual of DS-7600NI Series NVR Product Key Features General  Connectable to network cameras, network dome and encoders.  Connectable to the third-party network cameras like AXIS, Brickcom, Bosch, PANASONIC, SAMSUNG and SANYO, and network cameras that adopt ONVIF or PSIA protocol. ...
  • Page 7 User Manual of DS-7600NI Series NVR  Zooming in when playback.  Reverse playback of multi-channel.  Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback, and locating by dragging the mouse.  Up to 8-ch synchronous playback at 4CIF real time. Backup ...
  • Page 8 User Manual of DS-7600NI Series NVR  RS-485 transparent channel transmission.  Alarm and exception information can be sent to the remote host.  Remotely start/stop recording.  Remotely start/stop alarm output.  Remote PTZ control.  Two-way audio and voice broadcasting. ...

  • Page 9: Table Of Contents

    User Manual of DS-7600NI Series NVR TABLE OF CONTENTS Product Key Features ..........................6 Chapter 1Introduction ........................... 13 Front Panel ............................ 14 IR Remote Control Operations ...................... 15 USB Mouse Operation ........................18 Input Method Description ......................19 Rear Panel ............................. 20 Chapter 2Getting Started ..........................
  • Page 10 User Manual of DS-7600NI Series NVR Manual Record ..........................66 Configuring Holiday Record ......................67 Configuring Redundant Recording ....................69 Configuring HDD Group for Recording ..................71 Files Protection ..........................72 Chapter 6Playback............................74 Playing Back Record Files ......................75 6.1.1 Playing Back by Channel ....................
  • Page 11 User Manual of DS-7600NI Series NVR 9.2.9 Configuring HTTPS Port ..................130 9.2.10 Configuring Email ....................131 Configuring UPnP™ ....................132 9.2.11 9.2.12 Configuring High-speed Download ................134 Checking Network Traffic ......................135 Configuring Network Detection ....................136 9.4.1 Testing Network Delay and Packet Loss ..............136 9.4.2 Exporting Network Packet ..................
  • Page 12 Editing a User ......................176 Appendix ..............................178 Glossary ..............................179 Troubleshooting ............................. 180 Summary of Changes ..........................186 List of Compatible IP Cameras ......................187 List of Hikvision IP Cameras ......................187 List of Third-party IP Cameras ....................... 191...

  • Page 13: Chapter 1Introduction

    User Manual of DS-7600NI Series NVR Chapter 1 Introduction...

  • Page 14: Front Panel

    User Manual of DS-7600NI Series NVR 1.1 Front Panel Figure 1. 1 DS-7600NI-SE(/N) and DS-7600NI-SE/P Table 1. 1 Description of Front Panel Name Description Power Power indicator turns yellow when system is running. Status indicator blinks red when data is being read from or Status Status written to HDD.

  • Page 15: Ir Remote Control Operations

    User Manual of DS-7600NI Series NVR 1.2 IR Remote Control Operations The NVR may also be controlled with the included IR remote control (not supported with the DS-7600NI-V and DS-7600NI-VP series NVR), shown in Figure 1. 3. Note: Batteries (2× AAA) must be installed before operation. Figure 1.
  • Page 16 User Manual of DS-7600NI Series NVR alphabet, symbols and numeric input). REC Button Enter the Manual Record setting menu. In PTZ control settings, press the button and then you can call a PTZ preset by pressing Numeric button. It is also used to turn audio on/off in the Playback mode. PLAY Button The button is used to enter the All-day Playback mode.
  • Page 17 User Manual of DS-7600NI Series NVR Go to Menu > Settings > General > More Settings by operating the front control panel or the mouse. Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls. Press the DEV button on the remote control.

  • Page 18: Usb Mouse Operation

    User Manual of DS-7600NI Series NVR 1.3 USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse: 1. Plug USB mouse into one of the USB interfaces on the front panel of the NVR. 2.

  • Page 19: Input Method Description

    User Manual of DS-7600NI Series NVR 1.4 Input Method Description Figure 1. 4 Soft Keyboard Description of the buttons on the soft keyboard: Table 1. 5 Description of the Soft Keyboard Icons Icons Description Icons Description English Capital English Numbers Symbols Lowercase/Uppercase Backspace...

  • Page 20: Rear Panel

    User Manual of DS-7600NI Series NVR 1.5 Rear Panel Figure 1. 5 DS-7604&7608NI-SE Figure 1. 6 DS-7604NI-SE/N Figure 1. 7 DS-7608&7616NI-SE/N Table 1. 6 Description of Rear Panel Interfaces Item Description LAN Interfaces Connector for LAN (Local Area Network). RS-485 Interface Connector for RS-485 devices.
  • Page 21 User Manual of DS-7600NI Series NVR Figure 1. 8 DS-7604&7608NI-SE/P Figure 1. 9 DS-7616NI-SE/P Item Description Connector for LAN (Local Area Network). LAN Network Interface Connects to RS-485 devices. RS-485 Interface 100~240VAC power supply Power Supply Switch for turning on/off the device. Power Switch Universal Serial Bus (USB) ports for additional devices such as USB USB Interface...
  • Page 22 User Manual of DS-7600NI Series NVR Connector for LAN (Local Area Network). LAN Network Interface Audio In RCA connector for voice talk input Ground (needs to be connected when NVR starts up). Audio Out RCA connector for audio output HDMI video output connector. HDMI Interface VGA Output DB9 connector for VGA output.

  • Page 23: Chapter 2Getting Started

    User Manual of DS-7600NI Series NVR Chapter 2 Getting Started...

  • Page 24: Starting Up And Shutting Down The Nvr

    2. Turn on the power switch on the rear panel. 3. After startup, the Power LED indicator turns on (supported by DS-7600NI-SE series NVR only). A splash screen with the status of the HDD appears on the monitor. The row of icons at the bottom of the screen shows the HDD status.
  • Page 25 User Manual of DS-7600NI Series NVR Rebooting the NVR In the Shutdown menu, you can also reboot the NVR. Steps: 1. Enter the Shutdown menu by clicking Menu > Shutdown. 2. Click the Logout button to lock the NVR or the Reboot button to reboot the NVR.

  • Page 26: Using The Wizard For Basic Configuration

    User Manual of DS-7600NI Series NVR 2.2 Using the Wizard for basic configuration By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below. Figure 2. 3 Start Wizard Interface Operating the Setup Wizard: 1. The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to use the Setup Wizard at that moment, click the Exit button.
  • Page 27 User Manual of DS-7600NI Series NVR Figure 2. 5 Date and Time Settings 6. After the time settings, click Next button which takes you back to the Network Setup Wizard window, as shown in Figure 2. 6. DS-7604&7608&7616NI-SE and DS-7600NI-V DS-7600NI-SE/N, DS-7600NI-SE/P and DS-7600NI-VP Figure 2.
  • Page 28 User Manual of DS-7600NI Series NVR Note: For DS-7600NI-SE/N, DS-7600NI-SE/P and DS-7600NI-VP series NVR, the internal NIC IPv4 address should be configured for the cameras connecting to the PoE network interfaces of the NVR. 7. Click Next button after you configured the network parameters, which takes you to the HDD Management window, shown in Figure 2.
  • Page 29 User Manual of DS-7600NI Series NVR Figure 2. 9 Record Settings 12. Click Copy to copy the settings to other channels, as shown in Figure 2. 10. Figure 2. 10 Copy Record Settings 13. Click OK to complete the startup Setup Wizard.

  • Page 30: Adding And Connecting The Ip Cameras

    User Manual of DS-7600NI Series NVR 2.3 Adding and Connecting the IP Cameras 2.3.1 Adding the Online IP Cameras Purpose: The main function of the NVR is to connect the network cameras and record the video got from it. So before you can get a live view or record of the video, you should add the network cameras to the connection list of the device.
  • Page 31 User Manual of DS-7600NI Series NVR manually. • Manual Steps: To add the online cameras with same network segment: The detected online camera will be listed in the camera list, as shown in the figure below. Figure 2. 13 Manual Adding IP Camera Interface Click the button to add the camera.
  • Page 32 User Manual of DS-7600NI Series NVR be added. Click Add to add the camera. • OPTION 2: Steps: Enter the Camera Management interface. Menu> Camera> Camera Figure 2. 15 Main Menu Repeat the step 1 and 2 of adding IP cameras manually to add the camera. Figure 2.

  • Page 33: Editing The Connected Ip Cameras And Configuring Customized Protocols

    User Manual of DS-7600NI Series NVR Figure 2. 17 Selecting Multiple Channels 2.3.2 Editing the Connected IP cameras and Configuring Customized Protocols After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the basic setting of the IP cameras.
  • Page 34 User Manual of DS-7600NI Series NVR Figure 2. 19 Network Configuration of the Camera You can edit the network information and the password of the camera. Figure 2. 20 Password Configuration of the Camera Click Apply to save the settings and click OK to exit the interface. Configuring the customized protocols Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure the...

  • Page 35: Editing Ip Cameras Connected To The Poe Interfaces

    User Manual of DS-7600NI Series NVR Figure 2. 21 Protocol Management Interface There are 16 customized protocols provided in the system, you can edit the protocol name; and choose whether to enable the sub-stream. Choose the protocol type of transmission and choose the transfer protocols. Note: The protocol type and the transfer protocols must be supported by the connected network camera.
  • Page 36 User Manual of DS-7600NI Series NVR network cameras directly; and if you disable the PoE interface, you can also connect to the online network cameras. And the PoE interface supports the Plug-and-Play function. Example: As for 7604NI-SE/P NVR, when you want to connect 1 online camera and connect 3 network cameras via PoE interfaces, you must disable 1 PoE interface in the Edit IP camera panel.

  • Page 37: Editing Ip Cameras Connected To The Built-In Switch Network Interfaces

    User Manual of DS-7600NI Series NVR Figure 2. 25 Edit IP Camera Interface - Manual Click the Apply button to finish adding. 2.3.4 Editing IP cameras connected to the built-in switch network interfaces (Only for DS-7600NI-SE/N series NVR) For DS-7600NI-SE/N series NVR, the extra network interfaces provide a built-in switch with plug-and-play function.
  • Page 38 User Manual of DS-7600NI Series NVR Click the button, and select the Adding Method in the drop-down list. • Plug-and-Play: It means that the camera is connected to the built-in switch interface, so in this case, the parameters of the camera can’t be edited. The IP address of the camera can only be edited in the Network Configuration interface, see Chapter 9.1 Configuring General Settings for detailed information.

  • Page 39: Chapter 3Live View

    User Manual of DS-7600NI Series NVR Chapter 3 Live View...

  • Page 40: Introduction Of Live View

    User Manual of DS-7600NI Series NVR 3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live View mode when powered on. Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms occur as soon as possible.

  • Page 41: Operations In Live View Mode

    User Manual of DS-7600NI Series NVR 3.2 Operations in Live View Mode In live view mode, there are many functions provided. The functions are listed below. • Single Screen: showing only one screen on the monitor. • Multi-screen: showing multiple screens on the monitor simultaneously. •...

  • Page 42: Quick Setting Toolbar In Live View Mode

    User Manual of DS-7600NI Series NVR Figure 3. 1 Right-click Menu 3.2.2 Quick Setting Toolbar in Live View Mode On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the corresponding screen.
  • Page 43 User Manual of DS-7600NI Series NVR Figure 3. 3 Digital Zoom Image Settings icon can be selected to enter the Image Settings menu. You can set the image parameters like brightness, contrast, saturation and hue. Figure 3. 4 Image Settings- Customize Live View Strategy can be selected to set strategy, including Real-time, Balanced, Fluency.

  • Page 44: Adjusting Live View Settings

    User Manual of DS-7600NI Series NVR 3.3 Adjusting Live View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Steps: 1.
  • Page 45 User Manual of DS-7600NI Series NVR Select the small window, and double-click on the channel number to display the channel on the window. You can click button to start live view for all the channels and click to stop all the live view.

  • Page 46: User Logout

    User Manual of DS-7600NI Series NVR 3.4 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password tog in again. Steps: 1.

  • Page 47: Chapter 4Ptz Controls

    User Manual of DS-7600NI Series NVR Chapter 4 PTZ Controls...

  • Page 48: Configuring Ptz Settings

    User Manual of DS-7600NI Series NVR 4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Steps: 1. Enter the PTZ Settings interface. Menu >Camera>...

  • Page 49: Setting Ptz Presets, Patrols & Patterns

    User Manual of DS-7600NI Series NVR 4.2 Setting PTZ Presets, Patrols & Patterns Before you start: Please make sure that the presets, patrols and patterns should be supported by PTZ protocols. 4.2.1 Customizing Presets Purpose: Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place. Steps: 1.

  • Page 50: Calling Presets

    User Manual of DS-7600NI Series NVR 4.2.2 Calling Presets Purpose: This feature enables the camera to point to a specified position such as a window when an event takes place. Call preset in the PTZ setting interface: Steps: 1. Enter the PTZ Control interface. Menu>Camera>PTZ>More Settings 2.

  • Page 51: Customizing Patrols

    User Manual of DS-7600NI Series NVR 2. Choose Camera in the list on the menu. 3. Double click the preset in the Preset list to call it. 4.2.3 Customizing Patrols Purpose: Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving on to the next key point.

  • Page 52: Calling Patrols

    User Manual of DS-7600NI Series NVR Repeat the above steps to add more key points. Click the icon to delete the corresponding key point, and click the trash icon to.delete all the key points. Select a key point, then click button to adjust the order of the key points.

  • Page 53: Customizing Patterns

    User Manual of DS-7600NI Series NVR Figure 4. 9 PTZ Toolbar- Patrol 4.2.5 Customizing Patterns Purpose: Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the PTZ movement according to the predefined path. Steps: 1.

  • Page 54: Calling Patterns

    User Manual of DS-7600NI Series NVR 4. Click to save the pattern. 4.2.6 Calling Patterns Purpose: Follow the procedure to move the PTZ camera according to the predefined patterns. Calling pattern in the PTZ setting interface Steps: 1. Enter the PTZ Control interface. Menu>Camera>PTZ>More Settings 2.

  • Page 55: Ptz Control Toolbar

    User Manual of DS-7600NI Series NVR 4.3 PTZ Control Toolbar In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or choose the PTZ Control icon to enter the PTZ toolbar. Figure 4.

  • Page 56: Chapter 5Record Settings

    User Manual of DS-7600NI Series NVR Chapter 5 Record Settings...

  • Page 57: Configuring Recording Parameters

    User Manual of DS-7600NI Series NVR 5.1 Configuring Recording Parameters Purpose: By configuring the recording parameters you can define the parameters which affect the image quality, such as the transmission stream type, the resolution and so on. Before you start: 1.
  • Page 58 User Manual of DS-7600NI Series NVR 2. Parameters Setting for Recording Select Record tab page to configure. You can configure the stream type, the resolution, and other parameters on your demand. • Pre-record: The time you set to record before the scheduled time or event. For example, when an alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera records it at 9:59:55.

  • Page 59: Configuring Record Schedule

    User Manual of DS-7600NI Series NVR 5.2 Configuring Record Schedule Purpose: Set the record schedule, and then the camera automatically starts/stops recording according to the configured schedule. Steps: 1. Enter the Record Schedule interface. Menu>Record>Schedule 2. Configure Record Schedule 1) Select Record Schedule. Figure 5.
  • Page 60 User Manual of DS-7600NI Series NVR Figure 5. 7 Edit Schedule III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time. Note: Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other. Repeat the above edit schedule steps to schedule recording for other days in the week.
  • Page 61 User Manual of DS-7600NI Series NVR Figure 5. 10 Descriptions of the color icons Click the Apply button to validate the settings. If the settings can also be used to other channels, click Copy, and then choose the channel to which you want to copy.

  • Page 62: Configuring Motion Detection Record

    User Manual of DS-7600NI Series NVR 5.3 Configuring Motion Detection Record Purpose: Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center and so on.
  • Page 63 User Manual of DS-7600NI Series NVR Figure 5. 14 Motion Detection Setting 5) Select the channels which you want the motion detection event to trigger recording. 6) Click Apply to save the settings. 7) Click OK to back to the upper level menu. 8) Exit the Motion Detection menu.

  • Page 64: Configuring Alarm Triggered Record

    User Manual of DS-7600NI Series NVR 5.4 Configuring Alarm Triggered Record Purpose: Follow the procedure to configure alarm triggered recording. Steps: Enter the Alarm setting interface. Menu> Configuration> Alarm Figure 5. 15 Alarm Settings Click the Alarm Input tab. Figure 5. 16 Alarm Settings- Alarm Input 1) Select Alarm Input number and configure alarm parameters.
  • Page 65 User Manual of DS-7600NI Series NVR Figure 5. 17 Alarm Settings 5) Choose the alarm triggered recording channel. 6) Check the checkbox to select channel. 7) Click Apply to save settings. 8) Click OK to back to the upper level menu. Repeat the above steps to configure other alarm input parameters.

  • Page 66: Manual Record

    User Manual of DS-7600NI Series NVR 5.5 Manual Record Purpose: Follow the steps to set parameters for the manual record. The manual recording is prior to the scheduled recording. Steps: Enter the Manual settings interface. Menu> Manual Or press the REC button on the remote control. Figure 5.

  • Page 67: Configuring Holiday Record

    User Manual of DS-7600NI Series NVR 5.6 Configuring Holiday Record Purpose: Follow the steps to configure the record schedule on holiday for that year. You may want to have different plan for recording on holiday. Steps: Enter the Record setting interface. Menu>Record>...
  • Page 68 User Manual of DS-7600NI Series NVR Select Mode from the dropdown list. There are three different modes for the date format to configure holiday schedule. Set the start and end date. Click Apply to save settings. Click OK to exit the Edit interface. Enter Record Schedule settings interface to edit the holiday recording schedule.

  • Page 69: Configuring Redundant Recording

    User Manual of DS-7600NI Series NVR 5.7 Configuring Redundant Recording Purpose: Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. . Steps: 1.
  • Page 70 User Manual of DS-7600NI Series NVR Figure 5. 24 Record Parameters 2) Select Camera you want to configure in the drop-down list. 3) Check the checkbox of Redundant Record. 4) Click Apply to save settings and back to the upper level menu. Repeat the above steps for configuring other channels.

  • Page 71: Configuring Hdd Group For Recording

    User Manual of DS-7600NI Series NVR 5.8 Configuring HDD Group for Recording Purpose: You can group the HDDs and save the record files in certain HDD group. Steps: Enter HDD setting interface. Menu>HDD Figure 5. 25 HDD General Select Advanced on the left bar. Figure 5.

  • Page 72: Files Protection

    User Manual of DS-7600NI Series NVR 5.9 Files Protection Purpose: You can lock the recorded files or set the HDD property to Read-only to protect the record files from being overwritten. Protect file by locking the record files: Steps: Enter Playback setting interface. Menu>...
  • Page 73 User Manual of DS-7600NI Series NVR Figure 5. 29 Unlocking Attention Protect file by setting HDD property to Read-only Steps: Enter HDD setting interface. Menu> HDD Figure 5. 30 HDD General Click to edit the HDD you want to protect. Figure 5.

  • Page 74: Chapter 6Playback

    User Manual of DS-7600NI Series NVR Chapter 6 Playback...

  • Page 75: Playing Back Record Files

    User Manual of DS-7600NI Series NVR 6.1 Playing Back Record Files 6.1.1 Playing Back by Channel Purpose: Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.  OPTION 1: Choose a channel in live view mode using the mouse and click the button in the quick setting toolbar.
  • Page 76 User Manual of DS-7600NI Series NVR The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in Figure 6. 3. Figure 6. 3 Playback Interface Click the channel(s) to execute simultaneous playback of multiple channels. Figure 6.

  • Page 77: Playing Back By Time

    User Manual of DS-7600NI Series NVR 6.1.2 Playing Back by Time Purpose: Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported. Steps: 1. Enter playback interface. Menu>Playback 2. Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar. Figure 6.

  • Page 78: Playing Back By Event Search

    User Manual of DS-7600NI Series NVR Note: indicates the start/end time of the record. Table 6. 2 Detailed Explanation of Playback-by-time Interface Button Operation Button Operation Button Operation Button Operation Audio on/ Start/Stop 30s forward 30s reverse Mute clipping Add default Speed down customized tag management...
  • Page 79 User Manual of DS-7600NI Series NVR Figure 6. 8 Alarm Input Search Interface Figure 6. 9 Motion Search Interface 4. Click Search button to get the search result information. You may refer to the right-side bar for the result.
  • Page 80 User Manual of DS-7600NI Series NVR Figure 6. 10 Search Result Bar(Alarm In and Motion) 5. Click button to play back the file. Notes: Pre-play and post-play can be configured. If the event is set to trigger the recording of multiple channels, clicking the will pop up the Synch Playback interface.

  • Page 81: Playing Back By Tag

    User Manual of DS-7600NI Series NVR Figure 6. 12 Toolbar of Playback by Event Table 6. 3 Detailed Explanation of Playback-by-event Toolbar Button Operation Button Operation Button Operation Button Operation Audio on/ Start/Stop 30s forward 30s reverse Mute clipping Add default Speed down customized tag management...
  • Page 82 User Manual of DS-7600NI Series NVR Figure 6. 13 Interface of Playback by Time Click button to add default tag. Click button to add customized tag and input tag name. Note: Max. 64 tags can be added to a single video file. 3.
  • Page 83 User Manual of DS-7600NI Series NVR Figure 6. 15 Video Search by Tag 3. Click button to play back the file. You can click the Back button to back to the search interface. Note: Pre-play and post-play can be configured. Figure 6.

  • Page 84: Playing Back By System Logs

    User Manual of DS-7600NI Series NVR Table 6. 4 Detailed Explanation of Playback-by-tag Toolbar Button Operation Button Operation Button Operation Button Operation Audio on/ Start/Stop 30s forward 30s reverse Mute clipping Add default Speed down customized tag management Pause reverse Pause play/ play/ Scaling...

  • Page 85: Playing Back External File

    User Manual of DS-7600NI Series NVR Figure 6. 19 Result of System Log Search 4. Playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. Figure 6. 20 Interface of Playback by Log 6.1.6 Playing Back External File Purpose: Perform the following steps to look up and play back files in the external devices.
  • Page 86 User Manual of DS-7600NI Series NVR Figure 6. 21 Interface of External File Playback...

  • Page 87: Auxiliary Functions Of Playback

    User Manual of DS-7600NI Series NVR 6.2 Auxiliary Functions of Playback 6.2.1 Playing Back Frame by Frame Purpose: Play video files frame by frame, in case of checking image details of the video when abnormal events happen. Steps: Go to Playback interface. If you choose playback of the record file: click button until the speed changes to Single frame and one click on the playback screen represents playback of one frame.
  • Page 88 User Manual of DS-7600NI Series NVR Figure 6. 22 Interface of Playback by Time 2. Click the on the playback control toolbar to enter Smart Search mode. 3. Click and drag the mouse to draw area(s). You can click button to set the full screen as target searching area.
  • Page 89 User Manual of DS-7600NI Series NVR Figure 6. 24 Smart Search Result Figure 6. 25 Toolbar of Smart Search Playback Note: indicates the start/end time of the record. Table 6. 5 Detailed Explanation of Smart-search-playback Toolbar Button Operation Button Operation Button Operation Button...

  • Page 90: Digital Zoom

    User Manual of DS-7600NI Series NVR 6.2.3 Digital Zoom Steps: 1. Click the button on the playback control bar to enter Digital Zoom interface. 2. Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times. Figure 6.
  • Page 91 User Manual of DS-7600NI Series NVR Figure 6. 27 4-ch Synchronous Playback Interface 3. Click to play back the record files reversely.

  • Page 92: Chapter 7Backup

    User Manual of DS-7600NI Series NVR Chapter 7 Backup...

  • Page 93: Backing Up Record Files

    User Manual of DS-7600NI Series NVR 7.1 Backing up Record Files 7.1.1 Quick Export Purpose: Export record files to backup device(s) quickly. Steps: 1. Enter Video Export interface. Menu>Export>Normal Choose the channel(s) you want to back up and click Quick Export button. Note: 1) The time duration of record files on a specified channel cannot exceed one day.

  • Page 94: Backing Up By Normal Video Search

    User Manual of DS-7600NI Series NVR Stay in the Exporting interface until all record files are exported. Figure 7. 3 Export Finished 3. Check backup result. Choose the record file in Export interface and click button to check it. Note: The Player player.exe will be exported automatically during record file export.
  • Page 95 User Manual of DS-7600NI Series NVR Figure 7. 5 Normal Video Search for Backup 3. Select record files you want to back up. Click to play the record file if you want to check it. Check the checkbox before the record files you want to back up. Note: The size of the currently selected files is displayed in the lower-left corner of the window.
  • Page 96 User Manual of DS-7600NI Series NVR Figure 7. 7 Export by Normal Video Search using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”. Figure 7. 8 Export Finished 5.
  • Page 97 User Manual of DS-7600NI Series NVR Backup using USB writer and SATA writer Steps: 1. Enter Export interface. Menu>Export>Normal 2. Set search condition and click Search button to enter the search result interface. Figure 7. 10 Normal Video Search for Backup 3.
  • Page 98 User Manual of DS-7600NI Series NVR Figure 7. 12 Export by Normal Video Search using USB Writer Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”. Figure 7. 13 Export Finished 5. Check backup result. Choose the record file in Export interface and click button to check it.

  • Page 99: Backing Up By Event Search

    User Manual of DS-7600NI Series NVR 7.1.3 Backing up by Event Search Purpose: Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), or SATA writer. Quick Backup and Normal Backup are supported. Steps: 1. Enter Export interface. Menu>Export>Event 1) Select “Alarm Input”...
  • Page 100 User Manual of DS-7600NI Series NVR Figure 7. 17 Event Details Interface 4. Export. Click the Export button and start back up. Note: If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor.

  • Page 101: Backing Up Video Clips

    User Manual of DS-7600NI Series NVR Figure 7. 19 Export Finished 5. Check backup result. Note: The Player player.exe will be exported automatically during record file export. Figure 7. 20 Checkup of Event Export Result Using USB Flash Drive 7.1.4 Backing up Video Clips Purpose: You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB HDDs, USB writer) or SATA writer.
  • Page 102 User Manual of DS-7600NI Series NVR Figure 7. 21 Interface of Playback by Time 4. Click Yes to save video clips and enter Export interface, or click No to quit and do not save video clips. Figure 7. 22 Attention to Video Clip Saving 5.

  • Page 103: Managing Backup Devices

    User Manual of DS-7600NI Series NVR Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”. Figure 7. 24 Export Finished 6. Check backup result. Note: The Player player.exe will be exported automatically during record file export. Figure 7.
  • Page 104 User Manual of DS-7600NI Series NVR Select record files you want to back up. Click Export button to enter Export interface. Note: At least one record file shall be selected. Figure 7. 27 Result of Normal Video Search for Backup Backup device management.
  • Page 105 User Manual of DS-7600NI Series NVR Menu>Export>Normal Set search condition and click Search button to enter Search Result interface. Note: At least one channel shall be selected. Figure 7. 29 Normal Video Search for Backup Select record files you want to back up. Click Export button to enter Export interface.
  • Page 106 User Manual of DS-7600NI Series NVR Figure 7. 31 USB Writer Management...

  • Page 107: Chapter 8Alarm Settings

    User Manual of DS-7600NI Series NVR Chapter 8 Alarm Settings...

  • Page 108: Setting Motion Detection Alarm

    User Manual of DS-7600NI Series NVR 8.1 Setting Motion Detection Alarm Steps: 1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion detection. Menu> Camera> Motion Figure 8. 1 Motion Detection Setup Interface 2.
  • Page 109 User Manual of DS-7600NI Series NVR Figure 8. 3 Set Arming Schedule of Motion Detection 5. Click Linkage Action tab to set up alarm response actions of motion alarm (please refer to Chapter Setting Alarm Response Actions). Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days.

  • Page 110: Setting Sensor Alarms

    User Manual of DS-7600NI Series NVR 8.2 Setting Sensor Alarms Purpose: Set parameters and handling action of an external sensor alarm. Steps: 1. Enter Alarm Settings of System Configuration and select an alarm input. Menu> Configuration> Alarm Select Alarm Input tab to enter Alarm Input Settings interface. Figure 8.
  • Page 111 User Manual of DS-7600NI Series NVR Setting Alarm Response Actions). Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days. Figure 8. 6 Set Arming Schedule of Alarm Input 6.
  • Page 112 User Manual of DS-7600NI Series NVR Figure 8. 8 Copy Settings of Alarm Input...

  • Page 113: Detecting Video Loss Alarm

    User Manual of DS-7600NI Series NVR 8.3 Detecting Video Loss Alarm Purpose: Detect video loss of a channel and take alarm response action(s). Steps: 1. Enter Video Loss interface of Camera Management and select a channel you want to detect. Menu>...
  • Page 114 User Manual of DS-7600NI Series NVR Alarm Response Actions). Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days. 5. Click the OK button to complete the video loss settings of the channel.

  • Page 115: Detecting Video Tampering Alarm

    User Manual of DS-7600NI Series NVR 8.4 Detecting Video Tampering Alarm Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management and select a channel you want to detect video tampering.
  • Page 116 User Manual of DS-7600NI Series NVR Figure 8. 13 Set Arming Schedule of Video Tampering 4. Select Linkage Action tab to set up alarm response actions of video tampering alarm (please refer to Chapter Setting Alarm Response Actions). Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days.

  • Page 117: Handling Exceptions Alarm

    User Manual of DS-7600NI Series NVR 8.5 Handling Exceptions Alarm Purpose: Exception settings refer to the handling method of various exceptions, e.g. • HDD Full: The HDD is full. • HDD Error: Writing HDD error or unformatted HDD. • Network Disconnected: Disconnected network cable. •...

  • Page 118: Setting Alarm Response Actions

    User Manual of DS-7600NI Series NVR 8.6 Setting Alarm Response Actions Purpose: Alarm response actions will be activated when an alarm or exception occurs, including Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm Output and Send Email. Full Screen Monitoring When an alarm is triggered, the local monitor (VGA or HDMI monitor) display in full screen the video image from the alarming channel configured for full screen monitoring.
  • Page 119 User Manual of DS-7600NI Series NVR 2. Set up arming schedule of the alarm output. Choose one day of a week and up to 8 time periods can be set within each day. Note: Time periods shall not be repeated or overlapped. Figure 8.

  • Page 120: Triggering Or Clearing Alarm Output Manually

    User Manual of DS-7600NI Series NVR 8.7 Triggering or Clearing Alarm Output Manually Purpose: Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dropdown list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the following interface. Steps: Select the alarm output you want to trigger or clear and make related operations.

  • Page 121: Chapter 9Network Settings

    User Manual of DS-7600NI Series NVR Chapter 9 Network Settings...

  • Page 122: Configuring General Settings

    User Manual of DS-7600NI Series NVR 9.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate NVR over network. Steps: 1. Enter the Network Settings interface. Menu >Configuration>Network 2. Select the General tab. DS-7604&7608&7616NI-SE and DS-7600NI-V DS-7600NI-SE/N, DS-7600NI-SE/P and DS-7600NI-VP Figure 9.

  • Page 123: Configuring Advanced Settings

    User Manual of DS-7600NI Series NVR 9.2 Configuring Advanced Settings 9.2.1 Configuring PPPoE Settings Purpose: Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE). Steps: Enter the Network Settings interface. Menu >Configuration> Network Select the PPPoE tab to enter the PPPoE Settings interface, as shown in Figure 9. 2. Figure 9.
  • Page 124 User Manual of DS-7600NI Series NVR Figure 9. 3 DDNS Settings Interface Check the DDNS checkbox to enable this feature. Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and HiDDNS. • IPServer: Enter Server Address for IPServer. Figure 9.
  • Page 125 User Manual of DS-7600NI Series NVR 2) In the NVR Domain Name text field, enter the domain obtained from the NO-IP website (www.no-ip.com). 3) Enter the User Name and Password registered in the NO-IP website. Figure 9. 7 NO-IP Settings Interface •...
  • Page 126 User Manual of DS-7600NI Series NVR Figure 9. 9 Register an Account In the Device Management interface, click to register the device. Figure 9. 10 Register the Device The device name can only contain the lower-case English letter, numeric and ‘-’; and it Note: must start with the lower-case English letter and cannot end with ‘-’.

  • Page 127: Configuring Ntp Server

    User Manual of DS-7600NI Series NVR Figure 9. 11 Access Device via iVMS4200 Click Apply button to save and exit the interface. 9.2.3 Configuring NTP Server Purpose: A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system date/time.

  • Page 128: Configuring Snmp

    User Manual of DS-7600NI Series NVR 9.2.4 Configuring SNMP Purpose: You can use SNMP protocol to get device status and parameters related information. Steps: 1. Enter the Network Settings interface. Menu >Configuration> Network 2. Select the SNMP tab to enter the SNMP Settings interface, as shown in Figure 9. 13. Figure 9.

  • Page 129: Configuring Multicast

    User Manual of DS-7600NI Series NVR 3. Enter Alarm Host IP and Alarm Host Port in the text fields. The Alarm Host IP refers to the IP address of the remote PC on which the Network Video Surveillance Software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as the alarm monitoring port configured in the software.

  • Page 130: Configuring Server And Http Ports

    User Manual of DS-7600NI Series NVR Figure 9. 17 RTSP Settings Interface 3. Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you can change it according to different requirements. 4.

  • Page 131: Configuring Email

    User Manual of DS-7600NI Series NVR Figure 9. 19 HTTPS Settings Menu 4. Enter the HTTPS Port. 5. Click the Apply button to save and exit the interface. 9.2.10 Configuring Email Purpose: The system can be configured to send an Email notification to all designated users if an alarm event is detected, etc., an alarm or motion event is detected or the administrator password is changed.

  • Page 132: Configuring Upnp

    User Manual of DS-7600NI Series NVR Receiver: The name of user to be notified. Receiver’s Address: The Email address of user to be notified. Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send email with attached alarm images.
  • Page 133 User Manual of DS-7600NI Series NVR If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically. Steps: Click Apply button to save the settings. You can click Refresh button to get the latest status of the port mapping. Figure 9.

  • Page 134: Configuring High-Speed Download

    User Manual of DS-7600NI Series NVR Figure 9. 25 UPnP™ Settings Finished-Manual 9.2.12 Configuring High-speed Download Purpose: You can enable the High-speed Download function to widen the outgoing bandwidth of the device. In this way you can speed up the download of record files through IE browser or CMS software. Note: If you enable the high-speed download function, the local menu operation will be affected.

  • Page 135: Checking Network Traffic

    User Manual of DS-7600NI Series NVR 9.3 Checking Network Traffic Purpose: You can check the network traffic to obtain real-time information of NVR such as linking status, MTU, sending/receiving rate, etc. Steps: 1. Enter the Network Traffic interface. Menu >Maintenance>Net Detect Figure 9.

  • Page 136: Configuring Network Detection

    User Manual of DS-7600NI Series NVR 9.4 Configuring Network Detection Purpose: You can obtain network connecting status of NVR through the network detection function, including network delay, packet loss, etc. 9.4.1 Testing Network Delay and Packet Loss Steps: Enter the Network Traffic interface. Menu >Maintenance>Net Detect Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 9.

  • Page 137: Checking The Network Status

    User Manual of DS-7600NI Series NVR the backup device, please check whether it is compatible with the NVR. You can format the backup device if the format is incorrect. Figure 9. 31 Export Network Packet 4. Click Export to start exporting. 5.

  • Page 138: Checking Network Statistics

    User Manual of DS-7600NI Series NVR If the network is normal the following message box pops out. Figure 9. 34 Network status checking result If the message box pops out with other information instead of this one, you can click Network button to show the quick setting interface of the network parameters.

  • Page 139: Chapter 10 Hdd Management

    User Manual of DS-7600NI Series NVR Chapter 10 HDD Management...

  • Page 140: Initializing Hdds

    User Manual of DS-7600NI Series NVR 10.1 Initializing HDDs Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR. Note: A message box pops up when the NVR starts up if there exits any uninitialized HDD. Figure 10.
  • Page 141 User Manual of DS-7600NI Series NVR Figure 10. 5 HDD Status Changes to Normal Note: Initializing the HDD will erase all data on it.

  • Page 142: Managing Network Hdd

    User Manual of DS-7600NI Series NVR 10.2 Managing Network HDD Purpose: You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Steps: Enter the HDD Information interface. Menu > HDD>General Click the Add button to enter the Add NetHDD interface, as shown in Figure 10. 6. Figure 10.
  • Page 143 User Manual of DS-7600NI Series NVR Figure 10. 7 Add NAS Disk • Add IP SAN: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to search the available IP SAN disks. 3) Select the IP SAN disk from the list shown below. 4) Click the OK button to add the selected IP SAN disk.

  • Page 144: Managing Hdd Group

    User Manual of DS-7600NI Series NVR 10.3 Managing HDD Group 10.3.1 Setting HDD Groups Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings. Steps: 1. Enter the Storage Mode interface. Menu >...

  • Page 145: Setting Hdd Property

    User Manual of DS-7600NI Series NVR Figure 10. 12 Local HDD Settings Interface 7. Select the Group number for the current HDD. Note: The default group No. for each HDD is 1. 8. Click the OK button to confirm the settings. Figure 10.
  • Page 146 User Manual of DS-7600NI Series NVR Figure 10. 14 Set HDD Property 3. Set the HDD property to R/W, Read-only or Redundancy. 4. Click the OK button to save the settings and exit the interface. 5. In the HDD Information menu, the HDD property will be displayed in the list. Note: At least 2 hard disks must be installed on your NVR when you want to set a HDD to Redundancy, and there is one HDD with R/W property.

  • Page 147: Configuring Quota Mode

    User Manual of DS-7600NI Series NVR 10.4 Configuring Quota Mode Purpose: Each camera can be configured with allocated quota for the storage of recorded files. Steps: 1. Enter the Storage Mode interface. Menu > HDD > Advanced 2. Set the Mode to Quota, as shown in Figure 10. 15. Note: The NVR must be rebooted to enable the changes to take effect.
  • Page 148 User Manual of DS-7600NI Series NVR Figure 10. 17 Copy Settings to Other Camera(s) 6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP Camera to select all cameras. 7.

  • Page 149: Checking Hdd Status

    User Manual of DS-7600NI Series NVR 10.5 Checking HDD Status Purpose: You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case of HDD failure. Checking HDD Status in HDD Information Interface Steps: 1.
  • Page 150 User Manual of DS-7600NI Series NVR Figure 10. 19 View HDD Status (2)

  • Page 151: Hdd Detection

    User Manual of DS-7600NI Series NVR 10.6 HDD Detection Purpose: The device provides the HDD detection function such as the adopting of the S.M.A.R.T. and the Bad Sector Detection technique. The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.
  • Page 152 User Manual of DS-7600NI Series NVR Select the HDD No. in the dropdown list you want to configure, and choose All Detection or Key Area Detection as the detection type. Click the Detect button to start the detection Figure 10. 21 Bad Sector Detection And you can click Error info button to see the detailed damage information And you can also pause/resume or cancel the detection.

  • Page 153: Configuring Hdd Error Alarms

    User Manual of DS-7600NI Series NVR 10.7 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal. Steps: 1. Enter the Exception interface. Menu > Configuration > Exceptions 2. Select the Exception Type to HDD Error from the dropdown list. 3.

  • Page 154: Chapter 11 Camera Settings

    User Manual of DS-7600NI Series NVR Chapter 11 Camera Settings...

  • Page 155: Configuring Osd Settings

    User Manual of DS-7600NI Series NVR 11.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc. Steps: 1. Enter the OSD Configuration interface. Menu > Camera > OSD 2.

  • Page 156: Configuring Privacy Mask

    User Manual of DS-7600NI Series NVR 11.2 Configuring Privacy Mask Purpose: You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy mask can prevent certain surveillance areas to be viewed or recorded. Steps: 1.

  • Page 157: Configuring Video Parameters

    User Manual of DS-7600NI Series NVR 11.3 Configuring Video Parameters Steps: 1. Enter the Image Settings interface. Menu > Camera >Image Figure 11. 4 Image Settings Interface 2. Select the camera to set image parameters. 3. You can click on the arrow to change the value of each parameter. 4.

  • Page 158: Chapter 12 Nvr Management And Maintenance

    User Manual of DS-7600NI Series NVR Chapter 12 NVR Management Maintenance...

  • Page 159: Viewing System Information

    User Manual of DS-7600NI Series NVR 12.1 Viewing System Information 12.1.1 Viewing Device Information Steps: 1. Enter the System Information interface. Menu >Maintenance>System Info 2. Click the Device Info tab to enter the Device Information menu to view the device name, model, serial No. , firmware version and encode version, as shown in Figure 12.

  • Page 160: Viewing Alarm Information

    User Manual of DS-7600NI Series NVR 12.1.4 Viewing Alarm Information Steps: 1. Enter the System Information interface. Menu >Maintenance>System Info 2. Click the Alarm tab to enter the Alarm Information menu to view the alarm information, as shown in Figure 12.

  • Page 161: Viewing Hdd Information

    User Manual of DS-7600NI Series NVR 12.1.6 Viewing HDD Information Steps: 1. Enter the System Information interface. Menu >Maintenance>System Info 2. Click the HDD tab to enter the HDD Information menu to view the HDD status, free space, property, etc.. 12.2 Searching &...
  • Page 162 User Manual of DS-7600NI Series NVR Figure 12. 7 Log Search Results Note: Up to 2000 log files can be displayed each time. 5. You can click the button of each log or double click it to view its detailed information, as shown in Figure 12.
  • Page 163 User Manual of DS-7600NI Series NVR Figure 12. 9 Export Log Files 7. Select the backup device from the dropdown list of Device Name. 8. Click the Export to export the log files to the selected backup device. You can click the New Folder button to create new folder in the backup device, or click the Format button to format the backup device before log export.
  • Page 164 User Manual of DS-7600NI Series NVR Figure 12. 10 Log Export Interface You can check the checkbox of the HDD. Click the Export button to export all the log files stored in the HDD.

  • Page 165: Importing/Exporting Configuration Files

    User Manual of DS-7600NI Series NVR 12.3 Importing/Exporting Configuration Files Purpose: The configuration files of the NVR can be exported to local device for backup; and the configuration files of one NVR can be imported to multiple NVR devices if they are to be configured with the same parameters. Steps: 1.

  • Page 166: Upgrading System

    User Manual of DS-7600NI Series NVR 12.4 Upgrading System Purpose: The firmware on your NVR can be upgraded by local backup device or remote FTP server. 12.4.1 Upgrading by Local Backup Device Steps: 1. Connect your NVR with a local backup device where the update firmware file is located. 2.
  • Page 167 User Manual of DS-7600NI Series NVR Figure 12. 13 FTP Upgrade Interface 3. Enter the FTP Server Address in the text field. 4. Click the Upgrade button to start upgrading. 5. After the upgrading is complete, reboot the NVR to activate the new firmware.

  • Page 168: Restoring Default Settings

    User Manual of DS-7600NI Series NVR 12.5 Restoring Default Settings Steps: Enter the Default interface. Menu > Maintenance > Default Figure 12. 14 Restore Factory Default Click the OK button to restore the default settings. Note: Except the network parameters (including IP address, subnet mask, gateway, MTU, default route and server port), all other parameters of the device will be restored to factory default settings.

  • Page 169: Chapter 13 Others

    User Manual of DS-7600NI Series NVR Chapter 13 Others...

  • Page 170: Configuring General Settings

    User Manual of DS-7600NI Series NVR 13.1 Configuring General Settings Purpose: You can configure the output resolution, system time, mouse pointer speed through the Menu > Configuration > General interface. Steps: Enter the General Settings interface. Menu >Configuration> General Select the General tab. Figure 13.

  • Page 171: Configuring Dst Settings

    User Manual of DS-7600NI Series NVR 13.2 Configuring DST Settings Steps: Enter the General Settings interface. Menu >Configuration>General Choose DST Settings tab. Figure 13. 2 DST Settings Interface You can check the checkbox before the Auto DST Adjustment item. Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.

  • Page 172: Configuring More Settings For Device Parameters

    User Manual of DS-7600NI Series NVR 13.3 Configuring More Settings for Device Parameters Steps: Enter the General Settings interface. Menu >Configuration>General Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 3 Figure 13. 3 More Settings Interface Configure the following settings: •...

  • Page 173: Managing User Accounts

    User Manual of DS-7600NI Series NVR 13.4 Managing User Accounts Purpose: There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is 12345. The Administrator has the permission to add and delete user and configure user parameters. 13.4.1 Adding a User Steps: Enter the User Management interface.
  • Page 174 User Manual of DS-7600NI Series NVR Figure 13. 5 Add User Menu Enter the information for new user, including User Name, Password, Level and User’s MAC Address. Level: Set the user level to Operator or Guest. Different user levels have different operating permission. •...
  • Page 175 User Manual of DS-7600NI Series NVR Figure 13. 7 User Permission Settings Interface Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for the user. Local Configuration • Local Log Search: Searching and viewing logs and system information of NVR. •...

  • Page 176: Deleting A User

    User Manual of DS-7600NI Series NVR • Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s). • Local Video Export: Locally exporting recorded files of the selected camera (s). Click the OK button to save the settings and exit interface. Note: Only the admin user account has the permission of restoring factory default parameters.
  • Page 177 User Manual of DS-7600NI Series NVR Figure 13. 9 Edit User Interface Edit the user information, including user name, password, level and MAC address. Check the checkbox of Change Password if you want to change the password of the current user. Click the OK button to save the settings and exit the menu.

  • Page 178: Appendix

    User Manual of DS-7600NI Series NVR Appendix...

  • Page 179: Glossary

    User Manual of DS-7600NI Series NVR Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF.

  • Page 180: Troubleshooting

    1) If it is solved, finish the process. 2) If not, please contact the engineer from Hikvision to do the further process.  The status of the added IPC displays as “Disconnected” when it is connected through Hikvision Protocol. Select “Menu>Camera>Camera>IP Camera” to get the camera status.
  • Page 181 4. Check if the fault is solved by the step 1 to step 3. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  The IPC frequently goes online and offline and the status of it displays as “Disconnected”.
  • Page 182 3. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  Live view stuck when video output locally.
  • Page 183 If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process. When using the NVR to get the live view audio, there is no sound or there is too much noise, or the volume is too low.
  • Page 184 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process. The image gets stuck when NVR is playing back by single or multi-channel.
  • Page 185 Select “Menu > HDD > General” to view the HDD status, and verify the HDD is detected and can be read and written normally. 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.

  • Page 186: Summary Of Changes

    User Manual of DS-7600NI Series NVR Summary of Changes Version 2.3.4 Added Support adding IP cameras by the right-click menu. (Chapter 2.3.1) Support smart search function. (Chapter 6.2.2) Support connecting the third-party network cameras from Brickcom and Bosch. (Appendix-List of IP Cameras Compatible) Updated Optimize the method for adding encoder.

  • Page 187: List Of Compatible Ip Cameras

    User Manual of DS-7600NI Series NVR List of Compatible IP Cameras List of Hikvision IP Cameras Note: For the list, our company holds right to interpret. Max. Type Model Version Sub-stream Audio Resolution √ √ DS-2CD883F-E V4.1.0 build 130111 2560× 1920 √...
  • Page 188 User Manual of DS-7600NI Series NVR Max. Type Model Version Sub-stream Audio Resolution √ DS-2CD7164-E V4.1.0 build 130111 1280× 720 × √ √ DS-2CD764FWD-E(I) V4.1.0 build 130111 1280× 720 √ √ DS-2CD8264FWD-E(I) V4.1.0 build 130111 1280× 720 √ DS-2CD2012-I V4.0.9 build 130106 1280×...
  • Page 189 User Manual of DS-7600NI Series NVR Max. Type Model Version Sub-stream Audio Resolution DS-2CD976-V(B) DS-2CD976(C) V3.1.0 build120423 1600× 1200 × × DS-2CD976-V(C) V3.1.0 build120423 1600× 1200 × × DS-2CD977(B) V3.1 build 120423 1920× 1080 × × DS-2CD977(C) DS-2CD986A(B) V3.1.0 build120423 2448×...
  • Page 190 User Manual of DS-7600NI Series NVR Max. Type Model Version Sub-stream Audio Resolution DS-6604HCI DS-6601HFI √ DS-6602HFI V1.2.0 build 120215 704× 576 × DS-6604HFI...

  • Page 191: List Of Third-Party Ip Cameras

    User Manual of DS-7600NI Series NVR List of Third-party IP Cameras Note: ONVIF compatibility refers to the camera can be supported both when it uses the ONVIF protocol and its private protocols. Only ONVIF is supported refers to the camera can only be supported when it uses the ONVIF protocol.
  • Page 192 User Manual of DS-7600NI Series NVR IPC Manufacturer or Max. Model Version Sub-stream Audio Protocol Resolution × √ VB-M7000F Ver.+1.0.0 1280× 960 WV-SW152(ONVIF Application:1.66 √ × 800× 600 Image data:1.05 compatibility) WV-SC386(ONVIF Application:1.66 √ √ 1280× 960 Image data:1.05 compatibility) WV-SW155(ONVIF Application:1.66 √...
  • Page 193 User Manual of DS-7600NI Series NVR IPC Manufacturer or Max. Model Version Sub-stream Audio Protocol Resolution × √ VCC-HD4600P 2.03-02(110315-00) 1920× 1080 × × SNC-CH220 1.50.00 1920× 1080 SNC-RH124(ONVIF √ √ 1.73.00 1280× 720 compatibility) SONY SNC-EP580(ONVIF √ √ 1.53.00 1920×...
  • Page 194 User Manual of DS-7600NI Series NVR...

This manual is also suitable for:

Ds-7600ni series7600ni-se/n series7600ni-se/p series7600ni-v series7600ni-vp seriesDs-7604ni-se ... Show all

Table of Contents