Starting Up And Shutting Down The Device; Vehicle Ignition Startup And Time-Delay Shutdown - HIKVISION DS-M5504HNI Series User Manual

Name
Single-click
Left-click
Double-click
Click-and-drag
Right-click Single-click

1.5 Starting Up and Shutting Down the Device

Two working modes are available for the mobile NVR. The connection of power cables and control interfaces varies from
the device working mode.


Vehicle ignition startup and time-delay shutdown

The mobile NVR starts up when the vehicle ignites and shuts down according to the pre-defined delay time after the vehicle
is off. The startup and shutdown of the device depend on the vehicle ignition signal.

Timing on/off
The mobile NVR starts up or shuts down automatically according to the pre-defined time and the device works separately
from the running status of the vehicle.
1.5.1 Vehicle Ignition Startup and Time-delay Shutdown
The vehicle ignition startup and time-delay shutdown are realized by the vehicle ignition switch, which includes positive
pole ignition switch (providing high level signal when the switch closes) and negative pole ignition switch (providing low
level signal when the switch closes). The wire connection of the device varies from different vehicle ignition switch.
For detailed time settings of time-delay shutdown, see Chapter 6.1

Please contact the vehicle manufacturer for the connection information of starting switch.

The vehicle ignition switch, also called car key, controls the startup and shutdown of the vehicle. Most of the cars
adopts positive pole ignition switch currently.
Mobile Network Video Recorder User Manual
Action
Menu: Select and enter.
Checkbox: Check / Uncheck the checkbox.
Live View: Switch single-screen and multi-screen.
Tamper-proof, privacy mask, motion detection: Select target area.
Live View: Show right-click menu.
Menu: Go back to upper-level menu.
Description
14