Flashing Light Alarm Output - HIKVISION DS-9600NI-I16 DS-9616NI-I16 User Manual

2. Optional: Enable the event hint to display it in the live view window.
1) Check Enable Event Hint.
2) Click to select the exception type(s) to take the event hint.
3. Select an exception type.
4. Set the linkage actions. Refer to Configure Linkage Actions.

6.1.6 Flashing Light Alarm Output

After configuring flashing light alarm output, the camera flashing light can be activated when an
alarm is triggered.
Before You Start
Ensure a camera with flashing light alarm function is connected.
Steps
1. Go to System → Event → Normal Event → Flashing Light Alarm Output.
2. Select a camera.
Network Video Recorder User Manual
Figure 6-1 Event Hint Settings
Figure 6-2 Exceptions Handling
60