Set Wi-Fi - HIKVISION DS-KH6320-TE1 Configuration Manual

3. Select a device to link. Edit the following parameters.
Name
You can edit the name of the device.
Language
Select a language from the drop-down list for the device.
Network
Enable Auto Get IP Address and the system will assign IP address, subnet mask, and gateway
automatically. Or edit the IP address, subnet mask, and gateway manually.
Door Lock Parameters
After wire the lock with the door station, you can set name and door opening duration
according to your needs.
Note
Up to 2 locks can be configured.
Volume Settings
Set microphone volume and output volume.
Call Number Settings
The call No. should be the same as the indoor station's room No. If press the call button of
the door station, you can call the indoor station directly.
Public Password
You can use the public password to open the door station related door lock. Select the public
password type. Enter the old password and new password and then confirm the new
password. Tap OK to save the settings.
Restore to Default Settings
Restore All
All parameters will be restored to the factory settings. The system will reboot to take
effect.
Device Reboot
Reboot the device.

3.3.3 Set Wi-Fi

Some indoor station support Wi-Fi connection.
Note
Parts of models support setting Wi-Fi. For details, refers to actual product.
Network Indoor Station Configuration Guide
18