Checking Dialing Line - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Redialing Automatically
The default settings are as follows:
– AUTO REDIAL: <ON>
– REDIAL TIMES: <2TIMES>
– REDIAL INTERVAL: <2MIN.>
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <AUTO REDIAL>,
then press [OK].
5.
Press [ ] or [ ] to select <ON>, then press
[OK].
6.
Press [ ] or [ ] to select <REDIAL TIMES>,
then press [OK].
7.
Use [ ] or [ ], or the numeric keys to enter
the number of redials the machine will make,
then press [OK].
8.
Press [ ] or [ ] to select <REDIAL
INTERVAL>, then press [OK].
9.
Use [ ] or [ ], or the numeric keys to enter
the time (in minutes) between redials, then
press [OK].
Back Previous
10.
Press [ ] or [ ] to select <TX ERROR
REDIAL>, then press [OK].
11.
Press [ ] or [ ] to select <ON> or <OFF>,
then [OK].
<ON>: Resends all documents once if final transmission made by
automatic redialing is interrupted.
<OFF>: Does not redial when final transmission is interrupted.
12.
Press [Stop] to return to the standby mode.

Checking Dialing Line

■
Checking dialing line function enables you to configure the setting
on whether to check for a dial tone.
The default setting is <OFF>.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <DIALING LINE
CHCK>, then press [OK].
5.
Press [ ] or [ ] to select <ON>, then press
[OK].
6.
Press [Stop] to return to the standby mode.
TOP
Next
4-21