Canon imageCLASS MF6540 Reference Manual page 58

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Adjusting Manually
1.
Press [COPY].
2.
Press [Density] twice to select the manual mode.
3.
Press [ ] or [ ] to adjust the copy density,
then press [OK].
[ ]: to make dark documents lighter
[ ]: to make light documents darker
- To cancel all settings, press [Reset].
- When you switch the mode by pressing the mode keys such as
[FAX], all settings will be also canceled. If you want to keep the
settings, set the density as follows:
[Additional Functions] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <DENSITY> → <MANUAL>
(See "STANDARD SETTINGS, " on p. 11-10.)
Back Previous
Zoom Ratio
■
The default setting is <100%>.
Preset Zoom
You can enlarge or reduce documents from one standard paper size
to another.
1.
Press [COPY].
2.
Press [Enlarge/Reduce].
3.
Press [ ] or [ ] to select the copy ratio, then
press [OK].
- 200% MAX.
- 129% STMT → LTR
- 100%
- 78% LGL → LTR
- 64% LTR → STMT
- 50% MIN.
When <PAPER SIZE GROUP> in the <COPY SETTINGS> menu is set to
<A> or <AB>, the preset copy ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
TOP
Next
3-4