Checking Network Settings - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1

Checking Network Settings

Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can check the current network settings as follows.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <VIEW IP
ADDRESS>, then press [OK].
5.
Press [ ] or [ ] to select <IP ADDRESS>,
<SUBNET MASK>, or <GATEWAY ADDRESS> for
displaying the setting you want to check, then
press [OK].
6.
Press [Stop] to return to the standby mode.
Back Previous Next
TOP
6-20