Canon imageCLASS MF6540 Reference Manual page 79

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Editing One-Touch Speed Dialing Keys/Coded
Speed Dialing Codes
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4.
Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 23) or coded speed
dialing code (00 to 99) you want to edit, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5.
Press [ ] or [ ] to select <TEL NUMBER
ENTRY>, then press [OK].
6.
Press [Clear] repeatedly to go back to a wrong
digit.
You can also use [ ].
To delete all the numbers, press and hold [Clear].
7.
Enter a new number with the numeric keys, then
press [OK].
8.
Press [ ] or [ ] to select <NAME>, then press
[OK].
Back Previous
9.
Press [Clear] repeatedly to go back to a wrong
character.
You can also use [ ] to move the cursor to the wrong character,
then press [Clear] to delete it.
To delete the entire name, press and hold [Clear].
10.
Enter a new character with the numeric keys,
then press [OK].
You can also change the optional settings. For instructions, see
"Storing/Editing One-Touch Speed Dialing Keys/Coded Speed
Dialing Codes, " on p. 4-6.
11.
Press [Stop] to return to the standby mode.
Deleting One-Touch Speed Dialing Keys/ Coded
Speed Dialing Codes
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4.
Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 23) or coded speed
dialing code (00 to 99) you want to delete, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
TOP
Next
4-8