Canon imageCLASS MF6540 Reference Manual page 238

Before Using the
Machine 1
COMMON SETTINGS
Document and Paper
8. REG. PAPER SIZE
2
Copying
3
9. ENERGY IN SLEEP
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
10. MP TRAY STD SET
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
11. PAPER FEED SWITCH
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1. CASSETTE 1
2. CASSETTE 2**
OFF
ON
1. PAPER SIZE
2. SELECT PAPER TYPE
1. MP TRAY
SPEED PRIORITY
PRINT SIDE
Sets the paper size for the paper cassette. (See "For the Paper Cassette," on p. 2-12.)
Sets the paper size for paper cassette 1.
Sets the paper size for paper cassette 2.
Selects power consumption when the machine is in the Sleep mode between two levels.
– LOW (Only functional for MF6540/MF6520, or when <RX MODE> is not set to <FaxOnly> for
MF6595cx/MF6595/MF6590)
– HIGH
Sets the standard paper size and type for the multi-purpose tray if you always use a same kind
of paper. (See "For the Multi-Purpose Tray," on p. 2-13.)
Deactivates the multi-purpose tray standard settings.
Activates the multi-purpose tray standard settings.
Sets paper size as the multi-purpose tray standard.
Sets paper type as the multi-purpose tray standard.
Selects the paper feed method when you want to make onesided or two-sided prints on
preprinted paper (paper which has logos or patterns already printed on it).
Selects the paper feed method for the multi-purpose tray.
Print speed has priority.
The machine starts printing on the side of paper loaded facing up. Print speed becomes slower
for one-sided print.
Only available for LTR, LGL and A4.
Back Previous Next
TOP
11-8