Before Using the
Machine
1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
11.
Press [
] or [
] to select <START IP
ADDRESS>, then press [OK].
12.
Use the numeric keys to enter the start IP
address, then press [OK].
13.
Press [
] or [
] to select <END IP ADDRESS>,
then press [OK].
14.
Use the numeric keys to enter the end IP
address, then press [OK].
To enter another IP address range, repeat step 10 to 14.
15.
Press [Stop] to return to the standby mode.
16.
Restart the machine.
Back
Previous
RX MAC Address Settings
You can restrict the machine access from the computers on the
network by specifying the MAC addresses of the computers
allowed/forbidden to access the machine.
The default setting is <OFF>.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Press [
] or [
] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [
] or [
] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press [
] or [
] to select <RX MAC ADD
SET.>, then press [OK].
TOP
Next
6-17