Canon imageCLASS MF6540 Reference Manual page 210

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the machine in the Sleep mode?
A The machine does not scan documents if it is in the
Sleep mode. To take the machine out of the Sleep
mode, press [Power] on the operation panel.
Q Is the recipient's machine out of paper?
A Ask the recipient to make sure paper is loaded in the
machine.
Q Are there other documents being sent from
memory?
A Allow time for the documents to finish sending.
Q Has an error occurred during transmission?
A Check the LCD for an error message. (See "LCD
Messages, " on p. 10-9.)
A Print an Activity Report and check for an error.
(See "ACTIVITY REPORT, " on p. 11-43.)
Back Previous
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Before FAX Setting, " in the Starter Guide.)
Q Is the telephone line working properly?
A Make sure there is a dial tone when you press
[Hook] or when you lift the handset of any external
telephone connected to the machine. If there is no
dial tone, contact your local telephone company.
Q Is the recipient's machine a G3 fax machine?
A Make sure the recipient's machine is compatible with
your machine.
TOP
Next
10-23