Faxtel: Optional Settings; Receiving Features - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1

Receiving Features

Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can set the fax receive mode to suit your needs, set the
machine to receive fax documents into memory (memory lock),
and use the external telephone connected to the machine to
receive faxes manually (remote reception). You can also set how
the received documents are printed.

FaxTel: Optional Settings

■
When you select <FaxTel> in <RX MODE>, you can specify optional
settings as follows:
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <FAX/TEL OPT.
SET>, then press [OK].
Back Previous
5.
For <RING START TIME>, use [
numeric keys to specify the duration (0 to 30
seconds) for which the machine attempts to
detect the fax tone before it starts ringing, then
press [OK].
If the machine receives a fax, the machine does not ring and switches
to the receive mode automatically.
The default setting is <6SEC>.
6.
For <F/T RING TIME>, use [
numeric keys to specify the duration (15 to 300
seconds) of ringing, then press [OK].
The default setting is <15SEC>.
7.
For <F/T SWITCH ACTION>, press [
to select the action the machine will take after
the ringing ends, then press [OK].
The default setting is <RECEIVE>.
<RECEIVE>: Receives a fax.
<DISCONNECT>: Disconnects the call.
8.
Press [Stop] to return to the standby mode.
TOP
Next
], [ ], or the
], [ ], or the
] or [ ]
4-24