Canon imageCLASS MF6540 Reference Manual page 67

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Original Frame Erase
Original frame erase can erase the dark borders and frame lines that
appear around the copy when the document is smaller than the
selected paper size.
1.
Set documents.
2.
Press [COPY].
3.
Press [Frame Erase].
4.
Press [ ] or [ ] to select <ORIGINAL FR.>,
then press [OK].
5.
Press [ ] or [ ] to select the size of the
document, then press [OK].
6.
Press [ ] or [ ] to set the frame erase width
for all four borders, then press [OK].
The width ranges 1/16" to 1 15/16" (1 to 50 mm).
7.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
8.
Press [Start].
To cancel all settings, press [Reset].
Back Previous
Book Frame Erase
Book frame erase can erase the dark borders, as well as center and
contour lines that appear when copying facing pages in a book or
bound document onto a single sheet of paper.
1.
Set documents.
2.
Press [COPY].
3.
Press [Frame Erase].
4.
Press [ ] or [ ] to select <BOOK FRAME>,
then press [OK].
5.
Press [ ] or [ ] to select the book size, then
press [OK].
6.
Press [ ] or [ ] to set the book frame erase
width for all four borders, then press [OK].
The book frame erase width ranges 1/16" to 1 15/16" (1 to 50 mm).
7.
Press [ ] or [ ] to set the frame erase width
for the center of the book, then press [OK].
The width ranges 1/16" to 1 15/16" (1 to 50 mm).
8.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
9.
Press [Start].
To cancel all settings, press [Reset].
TOP
Next
3-13