Cleaning The Machine; Exterior - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1

Cleaning the Machine

Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Note the following before cleaning your machine:
– Make sure no document is stored in memory, then turn off the
main power switch and disconnect the power cord.
– Use a soft cloth to avoid scratching the components.
– Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static
charges.
– Never use volatile liquids such as thinners, benzene, acetone, or any
other chemical cleaner to clean the machine. These can damage the
machine components.
– Any data stored in the memory, including received fax documents, will
be deleted about 60 minutes after you turn off the main power switch or
unplug the power cord.
Back Previous

Exterior

■
1.
Turn off the main power switch and disconnect
the power cord.
2.
Wipe the machine's exterior with a clean, soft,
lint-free cloth dampened with water or diluted
dishwashing detergent solution.
3.
Wait for the machine to dry, then reconnect the
power cord and turn on the main power switch.
TOP
Next
9-3