Using The Remote Ui; Starting The Remote Ui - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1

Using the Remote UI

Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The Remote UI software enables you to access and manage the
machine connected to a network using a web browser.
Check the machine status from a network computer
●
Set and control the machine from a computer
●

Starting the Remote UI

■
Before you start the Remote UI, select <VIEW IP ADDRESS> in <NETWORK
SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of
the machine. If you do not know the IP address, consult with your network
administrator. (See "Checking Network Settings, " on p. 6-20.)
1.
Start the web browser.
2.
Enter the IP address of the machine in [Address]
or [Location] → press [Enter] on the keyboard.
The Remote UI screen appears.
Back Previous
3.
Enter the required information.
– For [Administrator Mode], enter the System Manager password if
required.
– For [End-User Mode], enter your user name.
For details on the System Manager password, see "Customizing
System Information, " on p. 7-13.
TOP
Next
7-4